How to fix undesirable echo or phasing on Universal Audio apollo x16?
To resolve undesirable echo or phasing, ensure that only one input monitoring system is enabled, either Console or DAW, but not both simultaneously.
Why can’t I hear preamp channels on my Universal Audio apollo x16?
If you cannot hear the preamp channels, first, ensure that the preamp gain is turned up for the channel(s) you are using. Also, check that MUTE is not engaged in the Console input channel strip.
General| Type | Audio Interface |
|---|---|
| Connectivity | Thunderbolt 3 |
| A/D Resolution | 24-bit/192kHz |
| Mic Preamps | None (requires external preamps) |
| Phantom Power | No |
| UAD Processing | Yes |
| Dynamic Range | 129dB (A-weighted) |
| Supported Plugins | UAD Plugins |
| Form Factor | Rackmount |
| Power Supply | Internal |
| Operating System Compatibility | macOS, Windows |
| Digital I/O | ADAT, AES/EBU |
Highlights of the Apollo x8p's core functionalities and specifications.
Controls for adjusting preamp gain and selecting input channels, with modes for Unison.
Details on optical ports for ADAT and S/PDIF digital audio connections and their routing.
Guidance on interconnecting multiple Apollo units and UAD devices via Thunderbolt.
Details on meeting system requirements, installing the software, and registering the product.
Overview of the Apollo x8p's input and output channel counts and port types.
Technical details on sample rates, bit depth, and latency for audio conversion.
Detailed specifications for microphone, Hi-Z, line inputs, line outputs, monitor, and headphone connections.
Specifications for S/PDIF, ADAT, Word Clock I/O, and synchronization sources.
Checklists for common symptoms like no power, no output, audio glitches, and unexpected behavior.
Comprehensive list of safety guidelines and explanation of warning symbols used in the manual.
Accessing UA's Knowledge Base, YouTube channel, and community forums for assistance.
To Next Page
