Need help?Do you have a question about the Universal Audio LA-610 and is the answer not in the manual?
Covers water, moisture, objects, ventilation, heat, power sources, and cords.
Details grounding, carts, cleaning, nonuse periods, damage, and servicing guidelines.
Lists input/output impedances, levels, frequency response, noise floor, and tube complement.
Introduces controls on the left side: Input Select, Gain, Level, EQ, Pad, Polarity, +48V.
Describes how to select Mic, Line, or Hi-Z inputs and their impedance settings.
Explains Gain, Level, and Pad controls for preamp signal adjustment and distortion.
Explains Peak Reduction for threshold/gain reduction and Gain for output level.
Explains how the T4 affects attack, release, and the 'memory' effect.
Covers water, moisture, objects, ventilation, heat, power sources, and cords.
Details grounding, carts, cleaning, nonuse periods, damage, and servicing guidelines.
Lists input/output impedances, levels, frequency response, noise floor, and tube complement.
Introduces controls on the left side: Input Select, Gain, Level, EQ, Pad, Polarity, +48V.
Describes how to select Mic, Line, or Hi-Z inputs and their impedance settings.
Explains Gain, Level, and Pad controls for preamp signal adjustment and distortion.
Explains Peak Reduction for threshold/gain reduction and Gain for output level.
Explains how the T4 affects attack, release, and the 'memory' effect.
General| Type | Channel Strip |
|---|---|
| Channels | 1 |
| Preamp Type | Tube |
| Compressor | Optical |
| Inputs | 1 x XLR, 1 x 1/4" |
| Outputs | 1 x XLR, 1 x 1/4" |
| Frequency Response | 20Hz - 20kHz |
| Tube Complement | 1 x 6072, 1 x 12AX7 |
To Next Page
