Universal Audio 4-710d User Manual

Model 4-710d
Four-Channel Tone-Blending
Mic Preamplifier
Universal Audio Part Number 65-00051
Revision A
Universal Audio, Inc.
Customer Service & Tech Support: +1-877-MY-UAUDIO
Business, Sales & Marketing: +1-866-UAD-1176
www.uaudio.com

Universal Audio 4-710d Specifications

General

Type	Pre-amp
Proper use	Concert/Studio
Product color	Silver

Summary

Notices

Important Safety Information

Read instructions and safety suggestions before use.

Introduction

Overview

Describes the 4-710d as a hybrid mic preamp and A/D converter.

Features

Lists key features of preamps and A/D conversion.

The Two Page, Two Minute Guide to Getting Started

Front Panel Descriptions

Analog Controls

Details controls like Gain, Blend, and Hi-Z inputs.

Digital Controls

Describes Power, Bit Depth, Limit, and Sample Rate controls.

Rear Panel Descriptions

Digital Connectors

Explains AES/EBU, Word Clock connections.

Analog Connectors

Details AC power, Line Inputs, and TRS connectors.

Interconnection Diagrams

Analog-Only Setup

Illustrates analog-only configuration for PA or analog recording.

Basic Digital Setup

Shows setup for digital recording using ADAT.

Advanced Digital Setup

Model 4-710d Overview

4-710d Vacuum Tube Preamp

Describes the tube preamp circuit design.

4-710d Solid-State Preamp

Explains the transimpedance solid-state preamp.

Phantom Power

A/D Conversion

AES/EBU Digital Output

ADAT Optical Digital Output

Word Clock I/O

Digital Clocking Primer

Insider's Secrets

The Best of Both Worlds

Drive Metering

Maintenance

Block Diagram

Specifications

Analog Section, Channels 1–4

Details specs for mic preamp and line out.

Component Specifications

Specs for preamp, filter, pad, phase, power, compressor, limiter, I/O, meter.

Digital Conversion Specifications

Specs for A/D conversion and 16-bit mode.

Output and Physical Specifications