www.urcsupport.com
19
page 18). If desired, repeat these to clear another Tune-
In key.
USING THE MASTER POWER KEY
The Titan Remote Control has a unique feature that
allows you to sequentially turn up to five of your home
entertainment devices on or off with a single key press.
NOTE: MASTER POWER only works in the STB mode.
In any other mode, pressing MASTER POWER
once will turn the selected device on or off.
Programming the Master Power Key
7. Press another mode key (AUX, DVD, AUD, or
TV) to add that device to the Master Power
Macro.
1. Press the STB key.
2. Press and hold SETUP. The mode LED blinks
twice.
3. Enter 9 9 5. The mode LED blinks twice.
4. Press POWER once.
5. Press STB once.
6. Press POWER once.
8. Press POWER once.
9. Repeat steps 7 and 8 until you have added
each device you wish to be part of the Master
Power macro.
10. Press and hold SETUP until the mode LED
blinks twice.
SETUP
SETUP
Titan OCAP Remote Control.fm Page 19 Tuesday, May 27, 2008 1:55 PM
To Next Page
Loading...
Need help?
General
