Universal Electronics Titan M2056-C User Manual

www.urcsupport.com
20
Using the Master Power Key
Clearing the Master Power Key
1. Press STB once.
2.
Press POWER . The remote sends a power
command to each device that was included in
the Master Power Macro.
1. On the remote control, press STB once.
2. Press and hold SETUP until the mode LED
blinks twice.
3. Enter 9 9 5. The mode LED blinks twice.
4. Press POWER once.
5. Press and hold SETUP until the mode LED
blinks twice.
SETUP
SETUP
Titan OCAP Remote Control.fm Page 20 Tuesday, May 27, 2008 1:55 PM

Universal Electronics Titan M2056-C Specifications

General

Brand	Universal Electronics
Model	Titan M2056-C
Category	Universal Remote
Language	English