Universal Remote Contorl MX-3000 User Manual

22 CCaatteeggoorryy
- Select the type or category of component (i.e.TV, VCR or DVD player).
33 BBrraanndd
- Select the company that made the component (i.e. B & K, Sony, Krell)
44 MMooddeell
- Select the Model or the Code Set number (sometimes the actual model, sometimes a generic #
assigned by us to a code set that operates many models over the years).
55 TTeesstt aannyy CCooddee
A.Verify the MX-3000 is charged and connect it to the PC via the USB port.
B. Point the connected MX-3000 so that it is in range and within line of sight of the component.
C. Select the code you want to test from the function list.
D. Click on the
TTeesstt
button as shown above.
66
Once you find the correct code, you can Save All the codes with one click by clicking on the Save All but-
ton, or you can drag and drop any single code to any button.
77
Continue with the rest of the devices you need, using the Device list box).
2299
TTyyppee iinn SSeeccttiioonn TTiittllee
M
X
3
0
0
0
T
O
U
C
H
S
C
R
E
E
N
R
E
M
O
T
E
S
The device you
would like to add
codes to:
The category of
codes.
The brand of the
manufacturer.
The model number of the device.
NOTE: Many models are controlled
by generic code sets listed as Sony
1, Sony 2 etc. Beneath the listed
models, every brand will have a few
generic code sets. If you don’t see
your model number, try each of these
until you find the right one.

Universal Remote Contorl MX-3000 Specifications

General

Brand	Universal Remote Contorl
Model	MX-3000
Category	Remote Control
Language	English