Universal Remote Control Easy Clicker UR3L-SR4 - Introduction; Replacing Batteries; Remove Battery Compartment Cover; Install Batteries Correctly

1
This remote control is designed to operate most Digital
and Analog Cable Boxes, as well as TVs, and a VCR or
DVD player.
Introduction
1
Before you program or operate the remote control, you must
install two new AAA alkaline batteries.
STEP1 Remove the battery compartment cover from the
back of your remote control.
STEP2 Check battery polarity carefully, and install the batter-
ies as shown in the illustration below.
STEP3 Replace the battery compartment cover.
Replacing Batteries
2