5
The MAIN Menu activity buttons issue
MACROS that reset the sound and
picture of your home theater to a new
activity.
TIP – The remote control is still
issuing commands while the
indicator flashes.
If the sound or the picture still are
not correct, repeat steps 1 and 2.
Select a DEVICE Only
1. Touch the MAIN button to make
sure that you are on the MAIN
Menu. Touch the Page button if you
don’t see the activity you want.
2. Press and hold the MAIN button.
While holding the MAIN button
down, touch the button next to the
desired screen label. The remote
control will now display the name of
the selected device and all buttons
will operate the device, however, the
sound and the picture of your sys-
tem have not been changed.
To Next Page
Loading...
Need help?
General
