Page 21
Programming Special
Advanced Features
Programming Multi-Commands to
Macro Buttons
The WR7 has 13 Macro buttons (ON, SYS-
TEM OFF, 7 Component buttons, and 4 “My
Favorites” buttons) that are designed to store
up to 20 commands in each button. Pressing
any one of the Macro buttons will send out
the series of commands that are stored in
that particular button.
MacroPower
™
Total System On/Off
MacroPower makes several devices work togeth-
er by pressing one button. Imagine the conven-
ience of turning on your TV, your DVD player
and your Surround Sound receiver by pressing
a single button on your WR7. What could nor-
mally take three remotes and three button push-
es, the WR7 can accomplish with the press of
one button. We call that MacroPower. Any of
the Power On or the System Off buttons can be
programmed for MacroPower control. To set it
up, follow these easy steps:
STEP 1: To program MacroPower commands
for the POWER [ON] button, press the POWER
[ON] button and the [MUTE] button at the same
time for two seconds until one of the component
button LED lights turns on.
MUTE
POWER
To Next Page
Loading...
Need help?
General
