Page 25
SimpleSound
™
Total System
Volume Control
SimpleSound is one of the most exciting fea-
tures of the WR7. It gives you total volume
control over ALL the components in your sys-
tem, even those that do not have built--in vol-
ume control, such as TIVO, DVD and VCR.
SimpleSound saves you the hassle and incon-
venience of constantly switching between
component modes just to control volume.
First you should identify which device in your
system will be used to deliver sound. In a
basic system, the sound may come from your
TV speaker. In a more advanced system, the
sound may come from your audio compo-
nents (such as a Surround Sound Receiver or
Home Theatre system).
Now, let’s set--up SimpleSound. Here’s how:
STEP 1: Press and hold the button that corre-
sponds to the Component you want to add vol-
ume control to (such as a DVD or VCR) and the
SELECT (SEL) button at the same time for about
three seconds until the component LED light
turns on.
IMPORTANT: You have 30 seconds to per-
form the next step while you are in program-
ming mode. If you do not press a button within
30 seconds, the component LED light will turn
off. The remote will exit the programming mode
and you will have to start over.
COMPONENT
BUTTONS
SELECT
To Next Page
Loading...
Need help?
General
