29
Universal Remote Control, Inc.
The RF Base Station converts radio signals to stan-
dard infrared commands and sends them out via a
built-in front blaster and/or the flashers to compo-
nents. The blaster is useful when a number of com-
ponents are in the same cabinet shelf space.
The Omega sends radio signal to
the MRF-100, MRF-250 or the
MRF-300 RF Base Stations.
Self-adhesive “flashers” (included with the MRF-250 or the
MRF-300) affix to the front panels of your components. The
flashers relay infrared commands to components out-of-sight of
the front blaster. The flashers plug into the rear flasher line out-
put jacks. Each flasher has a 10’ cable to easily reach compo-
nents on nearby shelves.
To Next Page
Loading...
