Universal Remote Control omega MX-650 User Manual

36
From the RF Settings Menu, select BLAST.
Decide whether you are changing the Blaster for all devices or just
one of the devices of the Omega.
Select ALL to change the blaster settings to
ALL devices in the Omega. Then, go to Step
4.
Select DEVIC to change the blaster settings to
just one of the devices in the Omega. Then,
go to Step 3.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change IR/RF set-
tings, then go to Step 4.
Select the new setting by pressing the desired button, then press SAVE
to save your new setting and return to the RF settings menu.
The Omega
1
2
4
3
Select a device
Page Button
displays the
other page
of devices.
Changes the cur-
rent front panel
BLASTER setting
Save the new setting
Exit this Menu with-
out changing the
EMITT settings

Universal Remote Control omega MX-650 Specifications

General

Brand	Universal Remote Control
Model	omega MX-650
Category	Universal Remote
Language	English