Universal Remote Control Universl Remote User Manual

STEP 4: Press the ON button on the GAMER to turn the component
back on. Now you can test the VOLUME and CHANNEL buttons (or
PLAY and STOP buttons for VCR and DVD) to make sure they all
work. If any of the buttons do not work properly, you need to find a
new code. So, continue pressing the Up Arrow button until you find
a code that turn off the component and makes the VOLUME or PLAY
buttons work.
STEP 5: Once you have found the right code, you must save it by
pressing the component button (in this case TV). The component LED
light will blink three times to confirm that the code was stored.
REPEAT THIS METHOD FOR THOSE COMPONENTS YOU COULD
NOT PROGRAM EARLIER WITH THE PRE-PROGRAMMED CODE
METHOD.
If you cannot find the right code after 5 minutes of trying the UP
ARROW button, please try the Learning Method (page 14).
13

Universal Remote Control Universl Remote Specifications

General

Brand	Universal Remote Control
Model	Universl Remote
Category	Universal Remote
Language	English