10
seconds. The next step must be
performed while the LED is on.
STEP2 Press the [VOL
6
] button. The device LED
will blink.
STEP3 Press the [TV] button. The device LED
will blink twice to confirm the
programming.
*Note : If you wish to have the channel keys
operate your Cable Box, press the [CBL]
button instead of the [TV] button in Step 3.
J.
J.
Assigning the DV
Assigning the DV
D
D
–
–
VOD keys to
VOD keys to
control your DVD
control your DVD
By default, the REW, Play, FF, Record, Stop and
Pause keys operate VOD (Video On Demand)
through your Cable Box. If you would like those
keys to operate those functions on your DVD,
press the PLAY button for 3 seconds until the DVD
button lights. To return to your Cable Box control,
press the PLAY key again for 3 seconds until the
CBL button lights.
K.
K.
Low Battery Warning
Low Battery Warning
When the battery is low (2.3V-2.0V) and needs to be
replaced with fresh batteries, device LED will blink 2
times in sequence whenever a [DEVICE] button is
pressed to turn on equipment.
L.
L.
Memory Lock System.
Memory Lock System.
This remote control is designed to retain
programmed memory for 10 years — even after
batteries are removed from the remote control.
For additional information about your remote
control, go to www.universalremote.com
To Next Page
Loading...
