Universal Remote Control UR3-SR3 - Introduction; Replacing Batteries

1
This remote control is designed to operate
most Digital and Analog Cable Boxes, as well
as TVs, and a DVD player.
Introduction
Install two
AAA alkaline batteries
as shown here
1
Before you program or operate the remote
control, you must install two new AAA alkaline
batteries.
STEP1 Remove the battery compartment cover
from the back of your remote control.
STEP2 Check battery polarity carefully, and
install the batteries as shown in the
illustration below.
STEP3 Replace the battery compartment cover.
Replacing Batteries
2