Universal COSMIC SERIES - II. HOW TO HANDLE AND MAINTAIN THIS MACHINE

II.
HOW
TO
HANDLE
AND MAINTAIN
THIS MACHINE
1. Since the
UNIVERSAL's DEVIL
ZONE employs a color
TV
receiving set,
be
careful
not to
shake it
during transit and
when carrying it about.
2. Install it at
a
location which is
not exposed to direct sunlight.
In order
to prevent the inside
temperature
rising,
avoid
as
much as possible
a
location near
a heater, etc.
3.
Since
the grounding terminal is visible,
be
sure to connect it to
a grounding conductor.
4. Insert the power
cord
into the
outlet
and
turn
on the switch.
5.
Even if
the solid-state
module seems
to be out of
order, do not check
the circuit
by
means
of
a circuit tester,
etc., since the internal
voltage of
the tester, etc.
may sometimes
break
down
the
IC.
6. Make
sure
the
machine is
well ventiated. If
the
temperature
of the IC and
transistor is lower
than
60°C,
the function
normally
and may
be considered
reliable. If it
exceeds
60°
C,
their
performance
cannot
be guaranteed.
7. Make
sure that the
connector, etc. is
not
disconnected.
8. Whenever
connecting the
power cord of the
solid-state
module
to,
or disconnecting
it from,
the
outlet,
be sure to turn the
power off.
9. Although
the
products of
UNIVERSAL
are
manufactured
with the
utmost
care, they
may
develop
malfunctions
when
used for long
periods.
So, be
sure to chek
this
machine
daily.