EasyManua.ls Logo

universalblue SIROCO - Maintenance and Cleaning

universalblue SIROCO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
HI: Fan turning at maximum speed.
MED: Fan turning at medium speed.
LOW: Fan turning at minimum speed.
1H: Setting for the fan to turn off automatically after 1 hour
of operation.
2H: Setting for the fan to turn off automatically after 2 hours
of operation.
4H: Setting for the fan to turn off automatically after 4 hours
of operation.
8H: Setting for the fan to turn off automatically after 8 hours
of operation
In order to be able to use the ceiling fan through the remote control,
the receptor included with this device must be installed before, as
explained in the installation section of this manual.
To use the remote control, you must add 2 batteries to the bottom
of the remote.
Note: Each remote control is associated with the receiver
included with the fan.
5. CLEANING AND MAINTENANCE
This product does not require a great deal of maintenance.
To clean, please follow the instructions below:
Unplug the fan first and wait until it comes to a complete
stop.
Use only a soft damp cloth.
Do not use abrasive cleaners.
If you are not going to use the fan for some time, it is
recommended to remove the batteries from the remote
control and store it in a clean and dry place.

Related product manuals