LUBRICATION & FUNCTION CHECK
Warning:
Turn off slicer and DISCONNECT ELECTRICAL CORD before lubricating. Close fence all
the way.
General lubrication should be performed in accordance with the lubrication instructions below. During this
lubrication sequence, be sure to check for free operation and movement of related parts as well as for
excessive wear and looseness of various parts. Be sure to check all handles and knobs for tightness.
LUBRICATION INSTRUCTIONS
Figure 3
A – APPLY PETROGEL AS PART OF MONTHLY MAINTENANCE
B – APPLY MINERAL OIL WEEKLY
To Next Page
Loading...
