Univex Duro 7510 - Page 19

7510/7512
CARRIAGE ARM AND SLIDE ASSEMBLY
MODEL 7510 - 7512
FIGURE 6
ILLUS. NO. PART NO. DESCRIPTION QTY.
1. 6509036 WASHER, SLIDE BAR RUBBER 2
2. 7510337. SPRING, SLIDE BAR (7512 ONLY) 2
6509035 SPRING, SLIDE BAR (7510 ONLY) 2
3. 8512229 SCREW, M5-0.8 X 12MM FL HD SLT 2
4. 7510434 BAR, CARRIAGE SLIDE 1
5. 7510326** BUSHING, CARRIAGE ARM 2
6. 7510325 SUPPORT, CARRIAGE ARM 1
7. 7510339 SLIDE, CARRIAGE 1
8. 6509041 WASHER, CARRIAGE SLIDE 2
9. 6509040 BOLT, CARRIAGE SLIDE 2
10. 9512299 BUSHING ECCENTRIC 1
11. 1053510 SCREW, CAP M6-1.0 X 25MM HX HD 1
12. 8512308 SCREW, BEARING LOCKING 1
13. 6509028 WASHER, M8 2
14. 6509031 BEARING 2
15. RESERVED
16. RESERVED
17. 6509037 WASHER 2
18. 6509042 BOLT, CARRIAGE 1
19. 7510043 CARRIAGE ARM 1
20. 6509044 KNOB, CARRIAGE ARM 1
21. 6509045
HANDLE, CARRIAGE ARM
1
22. 6509046 SCREW, CARRIAGE ARM HANDLE 2
23. 8512325 ANCHOR, CARRIAGE 1
24. 8512326 STUD, CARRIAGE ANCHOR 1
** Illus, 5 7510326 cannot be purchased separately it is pan of illus 6, 7510325.
PAGE 18