PICTURE MENU/ PC Settings
:
PC Settings Menu is available only in PC DB15 or DVI mode. When DVI signal input, only
Horizontal Position and Vertical Position can be adjusted.
Press
▼/▲
to highlight one of the following options, and then press ENTER to select it.
Auto Adjust
Automatically adjusts Clock, Phase, H-Position and V-Position settings.
In order to get a good result, you should open a fling the screen picture before executing
Auto Adjust.
Horizontal Position Shift the screen slightly to left or right.
Vertical Position Shift the screen slightly up or down.
Clock Adjust the DB15 picture signal sampling clock rate.
Phase Adjust the DB15 picture signal sampling phase. It maybe affects the definition. Wrong
Value maybe result the interference.
Reset the parameters of current menu to default value.
English -16
To Next Page
Loading...
Need help?
General
