To Next PageTo Next Page
Need help?Do you have a question about the Uponor Smatrix Base Pro and is the answer not in the manual?
General| Product Type | Controller |
|---|---|
| Series | Smatrix Base PRO |
| Communication | Wireless |
| Battery Backup | Yes |
| Number of Zones | Up to 12 |
| Storage Temperature | -20 °C to +60 °C |
| Temperature Control | Yes |
| Operating Temperature | 0 °C to +50 °C |
| Relative Humidity | Max. 95% non-condensing |
| Connectivity | Wi-Fi |
Controller safety guidelines, warnings, and connection notes.
Thermostat and system device safety guidelines and cautions.
Lists the various components of the Uponor Smatrix Base PRO system.
Illustrates a typical system configuration with numbered components.
Visual guide for the overall installation process of system components.
Detailed steps for wiring and connecting actuators, thermostats, and interface.
Procedure for pairing thermostats and system devices with the controller.
Steps to select channels and register various thermostat types to the controller.
Steps to register system devices, such as the interface, to the controller.
Procedure to safely exit the controller's registration mode.
Information on registering multiple controllers to a single interface.
Instructions for removing an incorrectly registered channel or device.
Procedure to reset and unregister all channels from the controller.
How to access and configure room bypass settings via the interface.
Explanation of the bus communication protocol and connection topologies.
Brief overview of additional functions like Autobalancing and Heat pump.
