25
USING THE ALTA – Use Without Lower Anchors
TO INSTALL WITHOUT USING LOWER ANCHORS
With Rigid Lower Anchor Connectors stored, place the booster on
the vehicle seat with the backrest flush with the vehicle seat back.
IMPORTANT: NEVER leave Child Restraint unsecured in your
vehicle even when it is unoccupied. In a crash, it could become
a projectile and injure other vehicle occupants. When not using
Lower Anchor, use the vehicle lap and shoulder belt to secure
the booster.
The back of the booster MUST fit tightly
against the back of the vehicle seat, and the
front of the booster MUST NOT hang over
the front of the vehicle seat. If the vehicle
head restraint cannot be adjusted or removed,
a different seating position or different
booster seat should be used.
To Next Page
Loading...
