31
Remove and Install Headrest Cover
The Headrest Cover can be removed for cleaning - See
the CLEANING AND MAINTENANCE section (page 36)
for more details.
TO REMOVE THE HEADREST COVER
1 Pull on the lower edge of the Headrest Cover to
remove the fabric from the slot that runs around the
outside of the Booster. Continue up the side of the
booster, pulling the fabric away from the side bolsters
and red Shoulder Belt Guide. Repeat for the other
side.
2 Pull the fabric out of the slot in the top of the
Booster. Pull the fabric forward and down making sure
both elastic straps are pulled forward through the
cutouts in the foam.
2
1
To Next Page
Loading...
