UPPAbaby ALTA - Cleaning and Maintenance Procedures; Fabric Component Cleaning; Plastic and Webbing Cleaning; Lower Anchor Connector Cleaning

34
Remove and Install Headrest Cover
4 Push the Headrest Cover into the slot on the
outside of the side bolster using the fabric
key. Repeat for the other side.
5 Push the Headrest Cover into the slot on
the side of the Booster using the fabric key.
Repeat for the other side.
6 Press the Headrest into slot under the red
Shoulder Belt Guide.
7 Continue to push the Headrest behind the
Shoulder Belt Guide using the fabric key.
Double check that the Headrest is tucked
completely outside of the Shoulder Belt
Guide. Repeat for the other side.
8 Store the fabric key inside the pocket in the
Seat fabric.
4
7
6
5