48
3 Lock vehicle seat belt.
4 Push the carrier into the vehicle seat bight (crease of the seat)
and gently apply pressure from behind the carrier into the
vehicle seat back. At the same time, pull on the shoulder portion
of the vehicle belt closest to the buckle and hold tightly.
NOTE: Be mindful of canopy.
5 Feed excess webbing into the vehicle retractor.
6 Rotate carry handle forward to the (5th) rebound position when
in use.
NOTE: Check that the carrier is still properly leveled.
CARRIER INSTALLATION WITH VEHICLE SEAT BELT
Lap/Shoulder Belt Preferred Routing Method
3
To Next Page
Loading...
