54
CARRIER INSTALLATION WITH VEHICLE SEAT BELT
Aircraft Installation
THIS CHILD SEAT IS CERTIFIED FOR AIRCRAFT USE WHEN USED WITHOUT A BASE.
UPPABABY AND THE FAA RECOMMEND THAT A CHILD WEIGHING UP TO 40 LBS (18 KG) USE A CERTIFIED
HARNESSED CHILD SEAT WHILE TRAVELING ON AN AIRCRAFT. CONTACT THE AIRLINE ABOUT THEIR POLICY
PRIOR TO TRAVELING.
AIRCRAFT INSTALLATION
When installing this child restraint on an airplane, install the same
way as CARRIER INSTALLATION WITH VEHICLE SEAT BELT/LAP
BELT ONLY ROUTING METHOD (Page 52).
NOTE: Make sure that the aircraft buckle does not interfere with
the belt guides on the infant carrier.
WARNING: DO NOT use base with
aircraft installation. Only the carrier is
certified for aircraft use. Inflatable seat
belts are not compatible with this child
restraint.
SAFETY REMINDERS AND TIPS
• Notify the airline ahead of time that you’ll be traveling
with a child restraint and ask about their specific policies
for using a child restraint system on board their aircraft.
• Install this carrier in a window seat to avoid blocking the
aisle.
• Ask for a seat belt extender if the lap belt is too short.
• Use only on a forward-facing aircraft seat.
• DO NOT use this restraint if a secure installation cannot
be achieved.
• Place carry handle in the most forward locked position
(child’s foot end) for use in the aircraft as long as it doesn’t
interfere with the back of the seat in front of the carrier.
To Next Page
Loading...
