To Next PageTo Next Page
Need help?Do you have a question about the Upright AB46RT and is the answer not in the manual?
General| Brand | Upright |
|---|---|
| Model | AB46RT |
| Category | Boom Lifts |
| Language | English |
Essential safety rules including load limits, wind speed, and securing the platform.
Guidelines for avoiding electrocution, tip-overs, collisions, and falls during operation.
Warning regarding engine exhaust and its health effects.
Detailed checks for chassis, tires, hoses, elevating assembly, and platform.
Verify hydraulic oil, battery fluid, fuel, and coolant levels.
Test engine start, controls, drive, boom functions, and safety features.
Identification and function of controls located on the chassis.
Identification and function of controls located on the platform.
Details on emergency stop, service horn, and fall restraint usage.
Procedure to start the engine using chassis controls.
Procedure to start the engine using platform controls.
Using Lo and Hi speed for maneuvering with the boom down.
Restrictions and creep speed for driving with the boom elevated.
Planning and executing platform placement at the work area.
Instructions for rotating the turret using the control switch.
Procedure for raising and lowering the riser.
Instructions for raising and lowering the upper boom.
Procedure for platform leveling, only with boom stowed.
Instructions for extending and retracting the upper boom.
Procedure for raising and lowering the jib.
Instructions for rotating the platform using the control switch.
Manual lowering of the elevating assembly in case of powered function failure.
Procedure to manually rotate the turret using a crank.
Steps to disengage drive hubs for towing or winching.
Daily closing procedures including securing the machine and turning off switches.
Guidelines for lifting the machine using a crane.
Instructions for loading and securing the machine onto a truck or trailer.
Instructions for fueling gasoline and diesel engines.
Safety precautions and procedures for battery care.
Procedures for checking and filling hydraulic oil.
Explanation of interval codes and symbols used in the service table.
Checklist for daily, monthly, and yearly maintenance tasks.
Graphical representation of the machine's working envelope.
Key technical data including dimensions, capacity, and power.
