Upright MB26 User Manual

Operator Manual
This first section of the Operator manual is the English language version.
Betriebsanleitung
Im zweiten Abschnitt dieser Betriebsanleitung finden Sie die Deutsche Version.
Manuel Utilisateur
èLa troisième section de ce manuel est la version en langue Française.
Manual del Usuario
El apartado cuarto de este manual del usuario corresponde a la versión en Españo.
Manuale d’Uso
La quinta sezione di questo manuale d'uso è la versione in lingua Italiana.
(EN) Manual part number 501375-001 for serial numbers MB20N-132/MB26-
245 to current.
(DE) Bestellnummer 501375-001 ab Seriennummer MB20N-132/MB26-245
fortlaufend.
(FR) Manuel Pièce numéro 501375-001 pour numéro série MB20N-132/
MB26-245 jusqu'au numéro courant.
(ES) El número de referencia para el manual es el 501375-001 para la
números de serie del MB20N-132/MB26-245 hasta el actual.
(IT) Manuale Ricambi Numero 501375-001 per Numeri di Serie da MB20N-
132/MB26-245 all’attuale.
MB20N/26
Feb 08

Upright MB26 Specifications

General

Brand	Upright
Model	MB26
Category	Boom Lifts
Language	English

Summary

Safety Rules

Electrocution Hazard

Machine is not insulated. Keep safe distance from live electrical parts.

Tip Over Hazard

Never elevate or drive on unstable surfaces. Never position platform without checking overhead.

Collision Hazard

Never position platform without checking for overhead obstructions or other hazards.

Fall Hazard

Never climb, stand, or sit on platform guardrails or midrail.

General Safety Precautions

Follow all safety rules and operating instructions before use. Do not exceed load limits or use as a crane.

General Description

Platform Capacity

Machine designed to travel with safe working load (SWL) up to 215 kg (475 lbs).

Operating Environment and Safety

Operate only on firm, level ground. Do not use on soft ground or slopes >2 degrees. Do not use lifting mechanism for goods.

Safety Inspection

Pre-Operation Checks

Daily safety inspection by user prior to use. Includes 14 checks.

Chassis and Oil Level Check

Inspect chassis for leaks, loose parts, and check hydraulic oil level using dip stick.

Battery Inspection and Top-Up

Function Checks (Lower Station)

Function Checks (Upper Station)

Tilt Sensor and Travel Checks

Operation of Platform Controls

Upper Control Panel Overview

Control Functions Explained

Elevating & Lowering the Work Platform

Procedure for elevating/lowering, including safety checks like personnel clearance and overload prevention.

Travel with Platform Lowered

Travel with Platform Elevated

Emergency Situations

Actions for emergencies: push Emergency Stop, response to audible alarm and tilt sensor.

Emergency Lowering (By Hand)

Procedure for manual emergency lowering of mast and jib, emphasizing safety precautions.

Transportation

Lifting by Fork-Lift

Lifting by Crane

Transport by Truck

Towing & Winching Valves

Valve Block Operation for Towing

Daily Preventative Maintenance Checklist

Maintenance Key and Component Checks

Explains the key for the checklist (Y/N/R) and lists components to inspect daily.

Specifications MB20N

Specifications MB26