Upright MB20N - 1. INTRODUCTION; SPECIAL INFORMATION; SPECIAL LIMITATIONS; MANUAL FORCE

Page 1
1 INTRODUCTION
1. I NTRODUCTION
This Operation manual is designed to provide instructions and illustrations for the safe
use and operation of the MB20N & MB26 Work Platform manufactured by Upright
Powered Access Ltd.
Figure 1: Manual Storage Information
S PECIAL I NFORMATION
Throughout this manual the users attention is drawn to these special warning boxes:
S PECIAL L IMITATIONS
The purpose of this machine is to provide fast and safe access to difficult to reach
areas.
Refer to the Specification section for the machines access limitations.
Travel with the platform raised is limited to creep speed range.
M ANUAL F ORCE
Manual force is the force applied by the occupants to objects such as walls or other
structures outside the work platform.The maximum allowable manual force is limited to
200 N (45 lbs.) of force per occupant, with a maximum of 400 N (90 lbs.)
The manual MUST be stored in the
box provided in the machine cage,
AT ALL TIMES.
D A N G E R
!
!
Indicates an imminently hazardous situation which, if not
avoided, will result in severe injury or death.
W A R N I N G
!
!
Indicates a potentially hazardous situation which, if not avoided,
could result in severe injury or death.
C A U T I O N
!
!
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
D A N G E R
!
!
DO NOT exceed the maximum manual force.
NEVER exceed the platform capacity.