uPunch HN3000 - Page 35

33
Setting the Month and Date of the start of Daylight
Savings Time (code 04)
When the code “04” appears, set the month and
date of the start of Daylight Savings Time (mm-dd).
Use the + and – buttons to make your selection, then
press Enter to conrm the setting. This may need to
be set each year, depending on your time zone.
Year Daylight Savings Time Starts
2014 March 9
2015 March 8
2016 March 13
2017 March 12
2018 March 11
Setting the Hour and Minute of the start of Daylight
Savings Time (code 05)
When the code “05” appears, set the hour and
minute of the start of Daylight Savings Time (hh:mm)
to 2:00am. Use the + and – buttons to make your
selection, then press Enter to conrm the setting.
Setting the Month and Date of the end of Daylight
Savings Time (code 06)
When the code “06” appears, set the month and
date of the end of Daylight Savings Time (mm-dd).
Use the + and – buttons to make your selection, then
press Enter to conrm the setting. This may need to
be set each year, depending on your time zone.
Year Daylight Savings Time Ends
2014 November 2
2015 November 1
2016 November 6
2017 November 5
2018 November 4