2
2.0 MOUNTING THE HN3000/
HN4000
Install the time clock away from excessive moisture,
extremely low or high temperatures, direct sunlight, dust,
mechanical vibration, and shock. Installation should also
take place away from the source of noise or electrical
interference.
Follow these steps to mount your time clock to a wall:
1. Drill two holes in the wall,
1
/
10
” in diameter and
4
1
/
2
” apart.
2. Insert the two dowels into the wall and then
insert the two screws into the dowels.
3. Hang the time clock on the screws.
The ideal height is 36–40” from the base to the
ground.
To Next Page
Loading...
