3
Cautions
To reduce the risk of re or shock hazard, observe the
following instructions carefully.
1. Disconnect the power before cleaning the time
clock. Do not use liquid or aerosol cleaners; use
only a damp cloth.
2. Never spill liquid of any kind on the time clock.
3. Do not overload wall outlets and extension cords,
as this may cause the time clock to malfunction.
4. Never place or press objects into the time clock,
as this may cause a short circuit between parts
and result in burning equipment.
5. Always plug the time clock into a surge protector
or uninterruptible power supply (UPS). If a surge
protector is not used and there is a power surge,
your warranty may become void.
To Next Page
Loading...
