CONTROLS
HELLAS USER MANUAL ENG
CHARGING
Plug the headphones into a USB power source using the micro USB cable. The USB cable can only be used for charging. 2 hours
charge gives approximately 14 hours of playback at medium volume.
Charge the battery before using the headphones for the first time.
CONNECTING TO A BLUETOOTH® ENABLED SOUND SOURCE
Follow the steps below when pairing your headphones with your sound source (smartphone, tablet or computer) for the first time.
1. If the device is turned off: Keep holding the touch interface for 4 seconds.
2. Select and connect to HELLAS on your sound source, according to its user manual.
After the initial pairing, the two devices will auto-connect when they are switched on and within the range of 10 meters.
PLAY/PAUSE/
ANSWER CALL
Single tap
PREVIOUS SONG
Swipe backward
NEXT SONG
Swipe forward
HANG UP/
REJECT CALL
Double tap
DECREASE
VOLUME
Swipe downward
INCREASE
VOLUME
Swipe upward
To Next Page
Loading...
