URC Total Control TDC-5100 - Sound Settings; Audio Level Adjustments; Brightness Settings; Screen and Mic Brightness Control

8
Total Control
TDC-5100
Owner’s Manual
Table of Contents
Sound
Use the plus and minus buttons to raise or lower the TDC-5100’s audio
levels. Dragging the slider to the left or right will also adjust it to a
specific audio level.
1. Button Sound: Audio level for button feedback when pressed.
2. Intercom Alert: Audio level for the incoming call notification.
3. Door Station Alert: Audio level for door station notifications.
Brightness
Use the plus and minus buttons to raise or lower the TDC-5100’s display
brightness. Dragging the slider to the left or right will also adjust it to a
specific brightness level.
1. Brightness Level: How bright the screen is when in use.
2. Night Mode Brightness Level: How bright the screen is when in
Night Mode.
3. Mic Backlight Brightness Level: How bright the mic button appears.
4. Enable Light Sensor: The TDC-5100 is equipped with an ambient
light sensor that can automatically adjust the display brightness.
Check the box to enable this feature.
1
2
3
1
2
4
3
Return to Settings Menu Page