30
Total Control
TDC-5100
Owner’s Manual
Table of Contents
Intercom (cont’d)
Navigating the Intercom Menu
The TDC-5100 has the capability of communicating across the home network
to any URC Intercom-Enabled device.
Accessing the Intercom button is performed by swiping down on the
Title Bar.
After selecting the Intercom button from the Title Bar Menu, the Intercom
Menu displays. This menu presents the end-user with useful information:
• Door Station Integration: In the case where a 3rd party door station has
been integrated with the Total Control system, those device(s) are located
at the top of the Intercom Menu.
• System Clients: The Intercom Menu lists every Intercom-Enabled client in
the system. There are three (3) possible status modes for each client:
• Available: The client is ready to receive any type of call.
• Not Available/Busy: Signifies the client is unable to receive a
call.
• Do Not Disturb: Signifies the client is currently in Do Not Disturb
mode.
• Broadcast Call: Populates a list of all available Intercom-Enabled
devices.
• Do Not Disturb Mode: Enabling the Do Not Disturb feature sets the
current TDC-5100 unavailable. This means that the keypad cannot
receive any calls from other interfaces.
Return to Settings Menu Page
To Next Page
Loading...