Urovo Technology Co., Ltd. Tle：400 888 6989 Fax：+86 755 86186290 Website：www.urovo.com
Hide navigation bar: the default is "off", select "on" if you want to hide the
navigation bar at the bottom of the screen.
Input method Editor pops up automatically: the default is "on", select
"Disable this function" if you want to disable automatic pop-up of input
method during code scanning.
Disable Input Method: the default is "on", the soft keyboard cannot be
popped up after closing.
Show scan suspension button: the default is "on", if you do not want to
scan the key value of the button to be output in the application, select "Off".
Automatic call recording: the default is "off", all call recordings of the
device will be automatically saved to local after turning on, which is
convenient for information traceability.
Three finger screenshots: the default is "off", take a screenshot by swiping
up or down on the screen with three fingers simultaneously after turning
on.
Screen pinning: the default is "off", the shortcut key ("power" key and
"volume +" key pressed simultaneously) can fix the current screen after
turning on, and at this time, you can only view the screen content, not to
operate; if you want to cancel the fixed, press the shortcut key again.
Default Launcher: modifies the default desktop of the system, which will
automatically enter the selected desktop.
2.14 Remap Key
Remap Key can keymap all physical keys except the power key, and the
mapped keys will be given a new key value, that is, pressing the button can
achieve customized functions.
1. Open “Settings-Enterprise featured setting-Remap Key”and check
Enable intercept key;
To Next Page