UROVO SQ47 - User Manual

SQ47
Quick Start Guide
3.01.200.10139
Appearance and Buttons
Unpacking Instructions
SIM Card, TF Card Installation Method
Note
：1、SIM1 support PSAM or MINI SIM1 。
2、SIM 2 support NANO SIM。
PSAM
SIM1
Battery Installation
TFslot
NANO SIM2
PSAM SIM1
Take card out(as shown )
Gently press SIM card into the tray to secure it. Follow the prompt to
insert TF card into Memory card slot (as shown).
Package Contents
Device x 1 Battery x 1 Power adapter x 1 USB cable x 1
Quick Start Guide & Warranty Policy x 1
Press the buttons on both sides
to remove the battery
Type C Charging port
System LED
Scan LED
Touch screen
Keypad
Battery
Loudspeaker
Rear camera
Scan engine
Flash
Scan button Scan button
PTT custom
button
Volume
up+/down
POGO PIN
Scan engine
RT40
Install the battery in the direction as show.
NOTE: Overexertion should be avoided when installing
or removing the battery.
Power Options
USB Data Cable Charging
PC Connections
Connect device to PC using the USB cable provided. If additional
driver is required, PC will automatiaclly download from internet.
Once the USB port has been connected, drag the notification bar
from the top of the screen to display the USB setting interface.
1) Tap this to activate developer menu shown.(Figure 1)
2) Tap this to activate USB preference menu shown.(Figure 2)
On Windows PC, go to“My Computer”. Click on“Removable Disk”
to view and transfer device data.
Power on: Press and hold the power button until device vibrates.
Shutdown: Press and hold the power button until the shutdown
prompt appears Click“Shutdown”.
Forced restart: Press and hold the power button for 10 seconds.
Do not press the shutdown prompt. Device will restart.
Connect one end of the USB cable to the adapter, and the other
end to the device. Charging cradle is recommended for convenient
charging.
Figure 1
Select this option
to share the device
data with the
computer.
Select this option
to access device
storage.
Choose this option
for charging the
device.
Choose this option
to transfer images.
Click this to switch on
debug mode
Figure 2
This device
SIM2

Summary

Device Appearance and Components

Physical Layout Overview

Identifies all physical buttons, ports, indicators, screen, and keypad.

Key Internal Components

Details the device's scan engine, flash, camera, loudspeaker, and battery.

Initial Setup and Operation

Package Contents and Unpacking

Lists items included in the package and instructions for unpacking.

SIM and TF Card Installation

Guide for inserting SIM and TF cards into the designated slots.

Battery Installation and Charging

Instructions for installing the battery and charging via USB.

PC Connectivity Setup

Steps to connect the device to a PC for data transfer and driver setup.

Device Indicators and Safety Information

Indicator Lights Explained

Explains the meaning of various indicator lights for battery and network status.

Battery Safety and Handling

Provides crucial safety guidelines for battery usage, storage, and disposal.

General Precautions

Important precautions for safe operation, accessory use, and environmental conditions.

Warranty Policy

Warranty Terms and Conditions

Details the warranty period, coverage, and conditions for the device and accessories.

UROVO SQ47 Specifications

General

Processor	Octa-core 2.0 GHz
Operating System	Android 9.0
Camera	13 MP rear, 5 MP front
Touch Panel	Capacitive multi-touch
NFC	Yes
Protection Grade	IP65
Display	4.7 inch
Resolution	1280 x 720
Battery	4500 mAh
Connectivity	4G, Wi-Fi, Bluetooth
Operating Temperature	-20°C to 50°C
Storage Temperature	-40°C to 70°C
Barcode Scanner	2D imager
Drop Specification	1.5 meters