EasyManua.ls Logo

USSC King 2007B - Tools and Materials Needed

USSC King 2007B
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2

You've purchased a heater from North America's oldest manufacturer of wood burning products.
By heating with wood you're helping to CONSERVE ENERGY!
Wood is our only Renewable Energy Resource. Please do your part to preserve our wood supply. Plant at least one tree
each year. Future generations will thank you.


Pencil
6 Foot Folding Rule or Tape Measure
Drill, Hand or Electric
Drill Bit 1/8" Dia. (For Sheet Metal Screws)
5/16" Nut Driver or 5/16" Socket w/Ratchet
Screw Driver (Blade-Type)
Gloves
Safety Glasses

6" Pipe, 6" Elbow, Collar and Thimble; As Required (24 gauge min.)
1/2" Sheet Metal Screws (No. 10A x 1/2")
6" Inside Diameter Underwriters Laboratories (UL) Listed Residential
Solid Fuel Factory-Built Triplewall Chimney or Exiting Masonry Chimney.
Floor Protector Material As Specied in this manual.
Furnace Cement (Manufacturer Recommends: Rutland Black Code
78 or Equivalent)

(SIDE VIEW)
(FRONT VIEW)
(TOP VIEW)

Related product manuals