Need help?Do you have a question about the USTM WS-30-H-1650-MONO and is the answer not in the manual?
Details power requirements and backup duration for the softener.
Specifies water quality requirements for optimal softener performance and longevity.
Covers requirements for connecting the softener to the water system.
Addresses specific considerations for copper piping installations to prevent corrosion.
Recommends installing a sediment pre-filter to protect the softener from impurities.
Guidance on choosing a suitable location and connecting the drainage.
Explains the device's anti-flooding features and setup for safety.
Details the automatic regeneration process and water treatment during it.
Advises on maintaining the correct salt level in the brine tank for proper functioning.
Lists and illustrates the components included with the compact softener.
Provides a connection scheme for installing the compact softener.
Details the steps for assembling the bypass valve to the control head.
Lists and illustrates the components of the two-piece softener.
Provides a connection scheme for installing the two-piece softener.
Details the steps for assembling the two-piece softener and its bypass.
General| Category | Water Dispenser |
|---|---|
| Model | WS-30-H-1650-MONO |
| Dimensions | 330 x 330 x 980 mm |
| Weight | 25 kg |
| Material | Stainless Steel |
| Certification | CE |
To Next Page
