USTM WS-25-LCD-CLARO - User Manual

INSTRUKCJA OBSŁUGI ZMIĘKCZACZA KOMPAKTOWEGO
CLARO WATER SOFTENER INSTRUCTION MANUAL
ИНСТРУКЦИЯ ОБСЛУЖИВАНИЯ УМЯГЧИТЕЛЯ
ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ ПОМ'ЯКШУВАЧА
WS-20-LCD-CLARO | WS-25-LCD-CLARO
WS-20-LCD-CLARO | WS-25-LCD-CLARO
WS-20-LCD-CLARO | WS-25-LCD-CLARO
WS-20-LCD-CLARO | WS-25-LCD-CLARO
PL
EN
RU
UA

Summary

Technical Parameters

General Information

Power Supply

Details power supply requirements (230V) and behavior during power failure.

Feed Water Quality

Specifies acceptable feed water quality and parameters to avoid.

Hydraulic Installation

Guidance on hydraulic system connection and handling of deposits.

Copper Installation

Advice for copper installations to prevent corrosion from softened water.

Pre-filter

Recommendation for a sediment pre-filter to protect the softener.

Location and Drainage

Guidance on softener placement and drainage connections.

Flood Protection

Details dual anti-flooding protection mechanisms.

Media Regeneration

Explains automatic regeneration start time and its effects.

Salt Level Management

Instructions on maintaining the correct salt level in the brine tank.

Start-up Instructions

Softener Components

Lists and illustrates the main components of the water softener.

Softener Installation

Provides initial guidance and precautions for softener installation.

Device Programming

Button Definition

Explains the function of each button on the control panel.

Setting Current Time

Procedure for setting the current time on the device controller.

Setting Regeneration Time

Procedure for adjusting the scheduled regeneration start time.

Input Water Hardness Setting

Procedure for setting the input water hardness parameter.

Start-up Procedure

Adjusting Treated Water Hardness

Troubleshooting

USTM WS-25-LCD-CLARO Specifications

General

Brand	USTM
Model	WS-25-LCD-CLARO
Category	Water Dispenser
Language	English