Utax P-C3060DN User Manual

2-38 Using the Operation Panel
Auto Cass. Change (Auto Cassette Change setting)
You can select the following actions when the paper runs out in the paper
source while printing. By default, this feature is On.
1 Press  while Print Settings > is displayed.
2 Press  or  repeatedly until >Auto Cass. Change appears.
3 To change the current paper feed source, press [OK]. A blinking
question mark (?) appears.
4 Select On or Off using  or .
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
Paper Feed Mode (Setting the paper feed source)
This mode specifies how the paper should be fed once the paper feed
source and paper type have been chosen. If Auto is selected, the printer
searches for a paper feed source that matches the paper size and type,
and paper is then delivered from that source. If Fixed is selected and
there is no matching paper feed source, handling proceeds as specified
by Paper Mismatch for Error Handling. For details on paper
feeding when Fixed is selected, refer to Paper Mismatch (Detection
settings for paper size/type errors when the paper source is fixed) on
page 2-68. The default setting is Auto. To change the settings, follow the
steps described below.
1 Press  while Print Settings > is displayed.
2 Press  or  repeatedly until >Paper Feed Mode appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Press  or  until Auto or Fixed appears.
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
Off The printer displays Load Cassette # (# is a cassette
number) or Load MP Tray, and stops printing.
Load the paper according to the paper source displayed to
resume printing.
To print from the other paper cassette, press
 or  to
display Use alternative?, press
 or  to select the
desired paper source, and then press [GO].
On The printer continues printing automatically when the other
paper cassette contains the same paper as the currently-
used paper cassette.
>Auto Cass. Change
? On
Note You can also configure the Auto Cassette Change in the
Embedded Web Server RX. Access to the Embedded Web
Server RX, and then go to Basic > Defaults > Device Defaults
page. For more information on access to the Embedded Web
Server RX, refer to the Embedded Web Server RX User Guide.
>Paper Feed Mode
? Auto

Utax P-C3060DN Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	9600 x 600 DPI
Time to first page (black, normal)	8.5 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Maximum duty cycle	- pages per month
Number of print cartridges	-
Paper input type	Cassette
Total input capacity	500 sheets
Total output capacity	250 sheets
Multi-Purpose tray input capacity	150 sheets
Paper tray media types	Cut sheet
Paper tray media weight	60 - 120 g/m²
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Wi-Fi	No
Mobile printing technologies	Apple AirPrint
Standard interfaces	USB 2.0
Memory slots	1
Internal memory	512 MB
Processor model	465S
Processor family	PowerPC
Processor frequency	677 MHz
Compatible memory cards	SD
Maximum internal memory	1536 MB
Sound power level (standby)	36 dB
Sound pressure level (printing)	55 dB
Certification	TÜV/GS, CE
Product color	White
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	76 W
Power consumption (printing)	529 W
Power consumption (PowerSave)	24 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	518 mm
Width	345 mm
Height	480 mm
Weight	29500 g