What to do if Utax P-4030D Printer says 'Add paper in casset'?
If your Utax printer displays 'Add paper in casset', it means the paper has run out in the indicated paper source. Simply supply paper to the displayed paper cassette, MP tray, or optional paper feeders to resolve the issue.
Why is my Utax P-4030D printing faint or blurred?
Faint or blurred printing on your Utax printer can occur due to several reasons: * The EcoPrint setting may be enabled. Turn it off via the operation panel. * The paper type setting might be incorrect. Ensure it matches the paper you are using. * Try replacing the paper with a newer, dryer paper.
What to do if Utax P-4030D Printer won't turn on?
If nothing lights up on the operation panel of your Utax printer, and the fan isn't running, check the following: * Ensure the power cord is securely plugged into the power outlet. If it is, try unplugging it, waiting a minute, and then plugging it back in. * Make sure that the power switch is pressed.
Why won't my Utax P-4030D Printer print from my computer?
If your Utax printer prints a status page but not from your computer, the issue might be: * The printer cable or interface cable isn't properly connected. Ensure both ends are secure, and try replacing the cable. * Program files or application software are causing the problem. Try printing a different file or using another print command. If the problem is specific to one file or application, review the printer driver settings for that application.
What does 'Check cassette #' mean on Utax P-4030D?
The 'Check cassette #' message on your Utax printer indicates a paper lift error within the specified paper source's cassette. To resolve this: * Pull out the indicated cassette (either a paper cassette or optional paper feeder) and ensure the paper is loaded correctly. Note: If this error occurs repeatedly, the message 'Call service' will be displayed.
Why is my Utax Printer emitting steam?
The steam coming from your Utax printer is likely due to low room temperature or damp paper. The heat generated during printing evaporates moisture in the paper, creating what looks like smoke. This is normal and not a problem. If it concerns you, raise the room temperature or use newer, dryer paper.
What does 'Check waste toner box' mean on Utax P-4030D Printer?
The 'Check waste toner box' message on your Utax printer indicates that the waste toner box is either not installed or is full. Install a new waste toner box to resolve this.
What to do if Utax P-4030D says 'Top tray is full'?
If your Utax printer displays 'Top tray is full of paper. Remove the paper,' it means the top tray has reached its capacity (approximately 250 or 500 pages depending on the model). Remove all printed pages from the top tray to allow the printer to continue printing.
Why is my Utax Printer printing black or white vertical streaks?
If your Utax printer is producing black or white vertical streaks, the drum unit or developer unit may be damaged. If the problem persists after printing several pages, contact service.
Why is my Utax Printer printing incomplete or out of position?
If your Utax printer is printing with incomplete or misaligned output, the application software may not be operating correctly. Verify that the application software is set up and being used properly.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | Laser |
| Maximum resolution | 1800 x 600 DPI |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 40 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 21 ppm |
| Maximum duty cycle | - pages per month |
| Number of print cartridges | 1 |
| Page description languages | Diablo 630, Epson LQ, PCL 5e, PCL 6, PCL XL, PDF 1.5 |
| Total input capacity | 500 sheets |
| Total output capacity | 250 sheets |
| Paper tray media types | Glossy paper, Matte paper, Plain paper |
| Paper tray media weight | 60 - 120 g/m² |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Mobile printing technologies | - |
| Standard interfaces | USB 2.0 |
| Optional connectivity | Wireless LAN |
| Internal memory | 128 MB |
| Compatible memory cards | SD |
| Maximum internal memory | 1152 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Product color | Black, White |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 11.5 W |
| Power consumption (printing) | 564 W |
| Power consumption (PowerSave) | 3 W |
| Mac operating systems supported | Mac OS X 10.0 Cheetah, Mac OS X 10.1 Puma, Mac OS X 10.2 Jaguar, Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks |
| Other operating systems supported | Novell NetWare 3.x, Novell NetWare 4.x, Novell NetWare 5.x, Novell NetWare 6.x, Novell Open Enterprise Server |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64, Windows Server 2012, Windows Server 2012 R2, Windows Server 2012 R2 x64, Windows Server 2012 x64 |
| Windows operating systems supported | Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
Weight and Dimensions| Depth | 410 mm |
|---|---|
| Width | 390 mm |
| Height | 285 mm |
| Weight | 13500 g |
To Next Page
