• Do not use a power drill for installation.
• Install and test the lock with the door open to avoid being
locked out.
• Please read all the instructions before contacting customer
support.
• Please contact customer support before returning the
product to the store.
• Do not install the batteries before installing the lock!
• Follow the instructions in sequential order!
• This lock is designed for the following operating temperatures:
Outside: -4°F(-20°C)to149°F(65°C)
Inside: 14 °F (-10 °C) to 131 °F (55 °C)
• Suggest to use AA Alkaline Battery, or manufacture suggested
Lithium Battery. Don’t use Rechargeable Battery.
To ensure the best service, please register your account at
www.u-tec.com/register.html
Need Help?
For technical documents and more
Please visit support.u-tec.com
Important Notes
Statements
- 1 -
Before using all ULTRALOQ products, please read all
applicable terms, rules, policies and usage provisions found at
www.u-tec.com/company/privacy. By using your
ULTRALOQ, you agree to be bound by the U-tec Privacy Policy.
ULTRALOQ Terms & Policies
Note:The Exterior Assembly of ULTRALOQ Bolt
Fingerprint is waterproof, but the Interior Assembly is not
waterproof at all due to the battery box.
To Next Page
Loading...