127127
10. Method of Securing Cylinder Steel straps only (Fabric straps pictured)10. Method of Securing Cylinder Steel straps only (Fabric straps pictured)
1. Lift the cylinder onto the truck with the arrow pointing1. Lift the cylinder onto the truck with the arrow pointing
up, inserting the securing pin into the cylinder.up, inserting the securing pin into the cylinder.
2. Grip the tensioner with the right hand, hold the buckle2. Grip the tensioner with the right hand, hold the buckle
belt with the left hand, and belt with the left hand, and align it with the open slot of align it with the open slot of thethe
ratchet shaft.ratchet shaft.
3. Pass the buckle belt through the open slot of the3. Pass the buckle belt through the open slot of the
ratchet shaft.ratchet shaft.
4. Pull down tightly on the buckle belt with your left hand.4. Pull down tightly on the buckle belt with your left hand.
Pull out the lock catch with your index finger, middle finger,Pull out the lock catch with your index finger, middle finger,
and ring finger. At the same time, push up until it bumpsand ring finger. At the same time, push up until it bumps
against the cylinder.against the cylinder.
To Next Page
Loading...
