EasyManua.ls Logo

Utilitech 4984545 - User Manual

Utilitech 4984545
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Questions, problems, missing parts? Before returning to the store, call our customer
service department at 1-866-994-4148, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could
also contact us at partsplus@lowes.com.
ITEM # 4984545
3-IN-1 DECORATIVE
VENTILATION FAN WITH
LED LIGHT
MODEL 7105-08-L
Español p. 13
READ AND SAVE THESE INSTRUCTIONS
01/2022
ATTACH YOUR RECEIPT HERE
Serial Number
___________________________
Purchase Date
__________________________
UTILITECH & logo design are trademarks or registered
trademarks of LF, LLC. All rights reserved.
AS22001

Table of Contents

Questions and Answers

  • E
    Emily CampbellAug 8, 2025
    What to do if my Utilitech 4984545 Fan is not clearing humidity from the room?
    • D
      Dustin FischerAug 8, 2025
      If your Utilitech Fan isn't clearing humidity, ensure sufficient airflow by slightly opening a door or window. The fan needs adequate airflow to draw air out of the room. Also, be sure the CFM rating on the fan matches the square footage of your room. Note that if the fan clears steam from the room within approximately 15 minutes of completing your shower, then the fan is operating properly.
  • T
    Terry MathewsAug 23, 2025
    Why is my Utilitech Fan so loud?
    • K
      Karen PerezAug 23, 2025
      Your Utilitech Fan might be loud due to several reasons. First, be sure the CFM rating on the fan matches the square footage of your room. The damper might be damaged or not working properly, so check the damper to ensure it is opening and closing correctly; if damaged, contact Customer Service. Ensure there are no sharp duct bends within 18 inches of the fan discharge. Using the recommended duct size can reduce noise. Finally, confirm the fan is securely attached to the ceiling joists.

Summary

Safety Information

Preparation

Wiring

Single Switch Wiring

Explains wiring connections for a single switch setup, including diagrams.

Two Switch Wiring

Explains wiring connections for a two-switch setup, including diagrams.

Typical Installation

New Construction Installation Instructions

Existing Construction Installation Instructions

Care and Cleaning

Remove and Clean Grille

Remove grille by squeezing mounting springs, disconnect connectors, and wipe with a damp cloth.

Clean Fan Housing

Remove dust and dirt from the fan housing using a vacuum cleaner.

Wipe Fan Housing Dry

Wipe the fan housing with a damp cloth and then dry it.

Reconnect LED Light Grille

Join LED light connectors from the fan housing to the grille before powering on.

Troubleshooting

Limited 5-Year Warranty

Utilitech 4984545 Specifications

General IconGeneral
BrandUtilitech
Model4984545
CategoryFan
LanguageEnglish

Related product manuals