EasyManua.ls Logo

UTStarcom cdm7126 - Making a Call Through the Contact List

UTStarcom cdm7126
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
75
MORE
PROMPTS
The prompts settings, “Mode” or “Timeout”, will allow you to set how
you are notified by the voice command system and the duration in
which you can respond. To access “Prompts:”
1.
Press the OK Key [Menu], then press for the “More”
menu. Press
“VR Settings”.
2.
Press “Prompts“.
3.
Select “Mode“ or “Timeout”.
4.
Press the Left Soft Key [Select] to save it.
NUMBER FORMAT
The prompts settings, “Mode” or “Timeout”, will allow you to set how
you are notified by the voice command system and the duration in
which you can respond. To access “Prompts:”
1.
Press the OK Key [Menu], then press for the “More”
menu. Press
“VR Settings”.
2.
Press “Prompts“.
3.
Select Accept Any“ or “North America”.
Mode: Select ”Prompt” or “Tones Only”.
Timeout: Select “5 sec. or “10 sec.”.
Accept Any: Processes phone numbers matching any numbering plan
(a specification of the number of digits and other phone-number
parameters).
North America: Processes only those phone numbers that are valid for
the numbering plan of the specified region. Specifying the
numbering plan improves the recognition rate.
CHAPTER 5
PERSONAL ORGANIZER
This section shows you how to use these features to turn
your phone into a time management planner that helps you
keep up with your contacts, schedules and appointments.
CHAPTER 5
PERSONAL
ORGANIZER

Table of Contents

Other manuals for UTStarcom cdm7126

Related product manuals