5. Scoop/cap: To keep rain and
debris out of Uuni 3 when not in
use. This doubles as a scoop for
adding pellets to your hopper.
Remember to remove this before
you light Uuni 3.
6. Chimney: Draws heat through
your Uuni 3 and features a quick
release clip to help secure and
pack away your Uuni 3 with
ease.
7. Door:* Remains on Uuni 3
throughout your cook, holding
in heat and allowing for
optimum airflow from burner to
chimney.
8. Burner and Hopper*:
Holds pellets which gravity
feed on to the grate.
9. Grate and Burner Tray*:
Your grate serves a dual
purpose: To allow for optimum
airflow through the pellets and
as a space for excess ash to
drop out of the burning area.
10. Hopper Lid: Doubles as a
handle for removing your grate
when completely cool.
Remember to leave this on your
hopper throughout your cook.
5.
6.
7.
8.
9. 10.
*requires assembly. Please refer to your manual for instructions.
Before you begin assembly, please read your manual
or watch how it’s done on our YouTube channel.
11
To Next Page
Loading...
