The appearance of stainless steel can be affected when exposed to temperatures of 537˚C (1000˚F) and
parts of your Pro will regularly reach this temperature and above. This will not affect the performance of
your Uuni Pro.
We recommend storing your Uuni Pro using your Uuni Pro Cover and keeping it in a dry environment.
Some imperfections can be removed using a stainless steel cleaner.
If you find that your Uuni Pro door it is sticking, this may indicate that your Pro is running too hot: Reduce
the amount of fuel added in one go and try to maintain temperatures of no more than 500˚C (932˚F).
There is also the option to loosen off the door hinges. Use the supplied allen key to loosen the hinges on
the sides of Uuni Pro as shown in adjacent diagram. Once loose, you can slide the door hinges forward
slightly before securing them again: This gives the door more room for expansion and will make it easier to
add and remove from Pro.
Always use your Uuni Gloves when the Uuni Pro is hot.
My Uuni Pro has changed
colour
My door is tricky to remove
Cant find the answer you’re looking for? Check out our online resources, FAQ or
contact us at support@uuni.net. We’ll be happy to help!
31
To Next Page
Loading...