Copyright ○
C
2021 UVision Innovation Co., Ltd. All rights reserved. 11
Adjusting Projection Image Focus
Rotate the Focus Ring to sharpen the Image Focus until the blurred image becomes clear.
Adjusting Projection Image Size
Place UVISION X1 on a flat, stable foundation squarely in front of the projection surface.
For best results, the projection surface shall be white and flat. The distance between this
projector and the projection surface must be a minimum of 1.1 meter (35 inches) and a
maximum of 5.9 meters (200 inches).
The distance between this projector and the projection surface determines the approximate
size of the image. Use the table below to determine approximately how far to place this
projector from the screen based on the size of the projected image.
To Next Page
Loading...
General