30
2. Inspect hanging ring, shackle, upper and
lower screws, hook, bolts, and latch for
abnormal conditions: for example,
mechanical damage, fractures, rust or
deformation.
3. Inspect upper screw / bolt and nut
(shackle) and lower screw / bolt and nut
(above the hook) and other removable parts
to make sure they are firmly tightened
and operational.
Results: If the dimension of the part
inspected does not conform to the values in
Checklist 1, or if there are any other
discrepancies, remove the scale from
operation immediately. The scale must be sent
to be repaired ONLY by trained professionals
authorized by UWE.
To Next Page
Loading...